All posts tagged ps2

I know what you are probably thinking, or perhaps not thinking, but…PS2 in 2021, why? Well, why not? the PS2 is still an awesome machine, even in 2021. I’m sure loads of folk would agree.

I decided to dust off my PS2 slim after over a year lying dormant and started to test some of my backups, all of which were skipping FMV’s and crashing so i thought, the lasers probably on its way out. Sad and crying (not really) I looked into alternative options to see what I could do to get it back up and running with better performance. OpenPS2Loader is one solution which I’d highly recommend. I’d heard of this a while ago, so thought I’d finally take a dive into checking it out to see what it was all about, and its honestly the best thing you could ever do for your PS2.

There’s plenty of guides out there so I wont go into the details here, but check out the videos from Phoenix Media:

This is also heavily documented on

There is also a huge community forum over at – that shows you how to install themes / discuss game compatibility, issues, and so on.

What is it?

psx-pi-smbshare is a preconfigured Raspbian based image for Raspberry Pi 1, 2, 3 and 4. It runs a Samba share, a pi-compatible build of ps3netsrv, and reconfigures the ethernet port to act as a router. This gives low-latency, direct access to the Samba service through an ethernet cable connection between a PS2/PS3 and Raspberry Pi.

Essentially, you are setting up the Pi as a router (connected to the PS2. Pi ethernet port configured to talk to the PS2 ethernet port), then through the PS2 OpenPS2Loader app (when configured) the Pi will access the USB stick or HDD through this ethernet connection between the devices, allowing you to play your PS2 backups all through the neat UI on the PS2. This method is much better than running a HDD through the PS2’s USB 1.1 port for obvious reasons. Through the PS2 USB port you will inevitably encounter FMV and game lag plus sound stuttering due to how slow the 1.1 port is.

All you need for this is a USB drive (or externally powered hard disk drive – in my case), a raspberry PI (doesn’t matter if its a pi0,1,2,3,4 etc), and an ethernet cable, plus a soft modded PS2 (with free mcboot).

I used a really old raspberry PI B+ model (yes that old) and a 500GB SSD in an external enclosure (with external power) for mine and it works a treat following the guides / github above.

There is also a nifty tool (USBUtil 2.2v) that will prep / patch backup game files greater than 4.5Gb into smaller parts that you can copy to the USB stick or hard drive, ready to play. OPL manager is another program for PC which will gather game images / box art and so on so that all your games look sweet through the PS2 UI. Check out some of the screenshots of it completed and working below:

Testing with a USB 3.0 Stick (64Gb)

Completion: Using a 500Gb external SSD in a (powered) caddy connected to the PS2 via ethernet cable. Beautiful.

This mod, alongside the PS2 connected to my PVM with RBG is the ultimate PS2 mod in my opinion. To add new backups I just connect the HDD to my PC, run the games through the USBUtil 2.2 program, then OPL manager to gather the box art etc, then put them onto the drive, and then reconnect it back up to the PS2 via ethernet, turn it all on, and its good to go.

If you have a PS2 and want to ”save” its laser, or just fancy a little side project (like I did), give this one a go. You won’t be disappointed.

Fife’s biggest gaming day EVER is coming to Kirkcaldy!

Society Club Kirkcaldy, Battle Lounge Fife, Showcase VR and Press Start Gaming Scotland are bringing a day and evening of gaming like you’ve never seen before!

We will have:

A retro gaming area: multiple consoles and games from the past – PS1, N64, Dreamcast just to name a few. With games you’ll love such as Mario Kart 64, Crash Bandicoot and many many more.


VR: We will have VR taster experiences with and array of games using the best tech in the field right now!

This will be an all day event with a session for kids and one just for adults from (with times to be agreed), Both sessions will have specific tournaments and activities!

There may be stalls with all Gaming Goodies!

Gaming Stalls will be also available.

Tickets will be £5: 

Kids Session 10am – 3:30pm – Everyone attending (All Kids and Accompanying Adults) will pay £5, the reason is to make sure we don’t over crowd this event and know numbers in the building for health and safety.

Adults Ticket 4:30pm – 9:00pm – £5 for everyone attending.

Chances are, if your reading this article you already know what the Rapsberry Pi is and have more than likely heard of its many uses. Including its ability to run Retropie, a freeware program that allows you to revisit many classic games from yesteryear through a series of emulators and ROMS.

Setting up RetroPie on a Raspberry Pi is very easy to do. Simply follow the steps below and you’ll be on a one way train to Nostaglia City in no time.

So first things first…

What will you need ?

  • A Rapsberry Pi – You can use any Rapsberry Pi device (A, A+, B, B+, 2, Zero, or 3) , however for better performance I’d recommend using a Rapsberry Pi 3 Model B. I’d also recommend going for a starter kit as they tend to include the raspberry pi enclosure, (Micro) SD card, charger and a memory card. For Example:
  • A USB mouse and keyboard. To be honest, you don’t really need a mouse, only a keyboard is needed to type some commands. For example:
  • An Ethernet cable, in case you want to use Ethernet instead of WiFi (n.b – the raspberry Pi 3 comes with a prebuilt in WiFi module).
  • HDMI cable to connect the Pi to your HDTV or monitor.
  • You will also need an SD card reader for your PC, or a micro SD adaptor if your PC already has a (SD/XD/Micro SD card) reader built in.
  • A compatible micro SD card (full list of supported cards here) – n.b if your buying a starter kit these usually come with a compatible SD card anyway.
  • Compatible game controller – I’d highly recommend the Buffalo Snes classic controller however, you can use Xbox 360, PS3, PS4 controllers as well if desired.

Again, the simplest way to get all the things you need is to go with a Raspberry Pi 3 starter kit, then just buy a HDMI & Ethernet cable and also a keyboard (if you don’t have a spare one lying about). 

Hardware Setup

For this example we will assume we are using an Ethernet cable and not wifi.

Now that you’ve received all the hardware, lets hook it up: Continue Reading